[ts-7000] Max197 to "com3" connector on enclosure

ts-7000

[ts-7000] Max197 to "com3" connector on enclosure

To:
Subject:	[ts-7000] Max197 to "com3" connector on enclosure
From:	"Tom Hansen" <>
Date:	Thu, 16 Mar 2006 18:06:38 -0000

I have a TS-7250 which I ordered with the optional 8-channel MAX197
A/D chip, and the enclosure.  It came with the COM1 and COM2
connectors already connected to the board.  The "COM3" connector is,
however, connected to the optional 8-channel A/D header.

My question is, how do the pins on the COM3 connector map to the A/D
header pins?  I can't find that documented anywhere.

Thanks.







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Max197 to "com3" connector on enclosure, Tom Hansen <= Re: [ts-7000] Max197 to "com3" connector on enclosure, Lennert Buytenhek

Previous by Date:	Re: [ts-7000] bugs on the on board watchdog timer, Curtis Monroe
Next by Date:	Re: [ts-7000] Max197 to "com3" connector on enclosure, Lennert Buytenhek
Previous by Thread:	[ts-7000] linux 2.6 on ts-7000 status, Lennert Buytenhek
Next by Thread:	Re: [ts-7000] Max197 to "com3" connector on enclosure, Lennert Buytenhek
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU