Re: [ts-7000] IRQ driven GPIO

To:
Subject:	Re: [ts-7000] IRQ driven GPIO
From:	Lennert Buytenhek <>
Date:	Thu, 9 Mar 2006 21:35:52 +0100

On Thu, Mar 09, 2006 at 08:08:31PM -0000, Yan Seiner wrote:

> I've not been able to find a GPIO interrupt driven module for the  
> TS-7xx0 kernel, so I've started collecting some kernel GPIO drivers  
> from other sources, with the intent of porting/writing one for the  
> TS-7xx0 kernel. 

http://svn.wantstofly.org/ep93xx/gpio-interrupt.diff (against 2.6)
might help you, apart from that it's completely untested.


--L


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] IRQ driven GPIO, Yan Seiner [ts-7000] Re: IRQ driven GPIO, Yan Seiner Re: [ts-7000] IRQ driven GPIO, Lennert Buytenhek <=

Previous by Date:	[ts-7000] Re: IRQ driven GPIO, Yan Seiner
Next by Date:	[ts-7000] remotely update file, chentom60
Previous by Thread:	[ts-7000] Re: IRQ driven GPIO, Yan Seiner
Next by Thread:	[ts-7000] remotely update file, chentom60
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU