[ts-7000] powersupply on board

To:
Subject:	[ts-7000] powersupply on board
From:	"sagittarian_savvy" <>
Date:	Mon, 06 Mar 2006 12:12:17 -0000

Hi,

   I am currently working on TS-7250 board and I wanted to know how 
the different supply voltages are provided to the board.

The schematic shows three types of power supply 3.3v,4.3v and 1.8v. So 
how these are provided from the main supply. Is it a voltage regulator 
or some other arrangement on the board that is not shown in the 
schematic..?

Anybody?







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] powersupply on board, sagittarian_savvy <=

Previous by Date:	[ts-7000] chip selects CSn[ ], resets, shane warne
Next by Date:	[ts-7000] chip select pins, shane warne
Previous by Thread:	[ts-7000] chip selects CSn[ ], resets, shane warne
Next by Thread:	[ts-7000] chip select pins, shane warne
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU