Hiya Ragin,
On Fri, 2006-03-03 at 21:03 -0800, ragin shah wrote:
> Hi !
> When I tried to mount USB device on TS-7250 board
> using scripts - "loadUSBModules.sh" & "loadUSB.sh" ,
> the error comes like :
> "hub.c: new USB device not_pci-3, assigned adress 2
> hub.c :USB device not accepting new adress=2
> (error=-110)
> hub.c : new USB device not_pci-3, assigned adress 3
> usb.c : USB device not accepting nre adress=3
> (error=-110) "
I have not seen this problem on my TS-7250 board but I have seen it on
my laptop when I plug in a GPS receiver. The same receiver works
perfectly on the TS-7250.
I got it to work by plugging a USB 2.0 hub into the laptop, and plugging
the GPS receiver into that. I have no idea why this worked but it's
worth a try!
-Phil <>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|