ts-7000
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[ts-7000] Delay when sending data on one serial port of TS-ISO485

from [Wouter van Wyk] [Permanent Link][Original]
To: <>
Subject: [ts-7000] Delay when sending data on one serial port of TS-ISO485
From: "Wouter van Wyk" <>
Date: Wed, 26 Oct 2005 13:17:27 +0200

Hi

 

I have a problem sending data on the second serial port (com4) on the TS-ISO485 card I have on my TS-7250 (The first port (com3) works fine). I open the device and write some data to it. Only after about 10 seconds do I see the data being transmitted. Did anybody see such a problem before?

 

Any suggestions will be appreciated!

 

Thanks

Wouter


YAHOO! GROUPS LINKS

  •  Visit your group "ts-7000" on the web.
     
  •  To unsubscribe from this group, send an email to:
     =Unsubscribe
     
  •  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  RE: [ts-7000] Unable to mount my CF, The Gilmans
Next by Date:  [ts-7000] Re: Latest and greatest file sets, vocemanago
Previous by Thread:  RE: [ts-7000] Re: TS7200/7250 Linux kernel, Jeffrey Frey
Next by Thread:  [ts-7000] Re: Delay when sending data on one serial port of TS-ISO485, trickyr67
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU