[ts-7000] Resistor R1 added for use of SPI

To:
Subject:	[ts-7000] Resistor R1 added for use of SPI_Frame
From:	"briannewberry2" <>
Date:	Thu, 06 Oct 2005 18:36:38 -0000

In the users manual for the TS-7200, the SPI_Frame pin is shown to work 
only after adding R1.  Does anyone have any information regarding where 
exactly R1 is to be added?  I see the silk screen label for R1 but have 
no idea where it actually goes.  There are several through holes there 
and I don't want to connect the wrong things.  I would guess it goes 
between the two holes that are to the top and the left of the R1 label, 
but I'm not sure enough to start soldering.  

Also, does anyone know what resistance R1 needs to be?

Thanks

Brian




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Resistor R1 added for use of SPI_Frame, briannewberry2 <=

Previous by Date:	[ts-7000] Re: test_sram, Keith Gilman
Next by Date:	[ts-7000] Re: test_sram, Keith Gilman
Previous by Thread:	[ts-7000] test_sram, Keith Gilman
Next by Thread:	[ts-7000] How to restore read-only FS to read-write?, Mike Dodd
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU

[ts-7000] Resistor R1 added for use of SPI_Frame