[ts-7000] TS7000 Boot up time

To:
Subject:	[ts-7000] TS7000 Boot up time
From:	"earls98295" <>
Date:	Tue, 27 Sep 2005 02:01:33 -0000

Hello All, I am a new group member looking at Arm / Linux
architecture for an embedded system. The TS7000 caught my 
eye. The application I am looking at would require low power
operation, however the Boot up time to get a user interface
(buttons and LCD graphics panel) up and running is important.

Could anybody give me an Idea as to how long it would take
to get an application running from a cold start on the TS7000 ?

Thanks
Earl Schmidt






------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS7000 Boot up time, earls98295 <= Re: [ts-7000] TS7000 Boot up time, Andy Gryc

Previous by Date:	[ts-7000] vmlinux, Sergio Paulo Sider
Next by Date:	[ts-7000] REG : Porting RTAI over the TS7250, PraneshKrishnan
Previous by Thread:	[ts-7000] vmlinux, Sergio Paulo Sider
Next by Thread:	Re: [ts-7000] TS7000 Boot up time, Andy Gryc
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU