Hi,
I am using my ts7250 as an encrypting interface for standard modem. It
works fine but:
* when I boot it with the modem attached, the board hangs (at least I
think so, since I can't telnet to it then) and a Rxd and Txd diodas of
the modem are on. I connect my modem to ttyAM0 port. Application opens
it with params as follows: 9600 8N1 with hardware flow control.
If I restart modem I can immidiately telnet to the board. Also if modem
is off the board starts up normally.
When the board is up I can use modem without any problems.
* messages such as "root login on pty/1" are sent over the ttyAM0 port
although I turned off getty respawn in inittab and removed JP2 jumper.
Can anyone tell me what I do wrong?
Michal Ajduk
------------------------ Yahoo! Groups Sponsor --------------------~-->
<font face=arial size=-1><a
href="http://us.ard.yahoo.com/SIG=12h8vlu5v/M=362329.6886308.7839368.1510227/D=groups/S=1705005378:TM/Y=YAHOO/EXP=1123637778/A=2894321/R=0/SIG=11dvsfulr/*http://youthnoise.com/page.php?page_id=1992
">Fair play? Video games influencing politics. Click and talk back!</a>.</font>
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|