[ts-7000] lcd panel

[<>]

Does anyone know where I can get a good quality graphics LCD panel at least 5 
inches in diameter for under 90.00 other than EARTHLCD?


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 






On Fri, 1 Jul 2005, nitelitephoto wrote:

> I have a 1GB USB disk with partion table and mkfs.jffs2.  It seems
> that the Linux system provided with TS-7250 cannot mount it, correct?
>  Only fat and ext2 are supported?
>
> $ mount  /dev/scsi/host0/bus0/target0/lun0/part1 /mnt/usb
> VFS: Can't find ext2 filesystem on dev sd(8,1).
> yaffs: Attempting MTD mount on 8.1, "08:01"
> FAT: bogus logical sector size 34276
> VFS: Can't find a valid FAT filesystem on dev 08:01.
> mount: Mounting /dev/scsi/host0/bus0/target0/lun0/part1 on /mnt/usb
> failed: Invalid argument

It may be possible to build yourself a kernel with the support in it, or
if jffs2 support is available as a module compile yourself the module and
install it.

However, I have to ask why are you using jffs2 ? I have seen comments that
jffs2 is not a good file system for CF. I thought I understood that to
support jffs2 you needed better access to the underlying flash
infrastructure than the CF interface gives?

>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>