| To: | |
|---|---|
| Subject: | [ts-7000] OP-ADC 12-bit 8ch A/C converter for TS-7250 |
| From: | Ben Lau <> |
| Date: | Thu, 16 Jun 2005 15:18:31 +0800 |
Hi all!
I have a question about OP-ADC option(12-bit 8ch A/C converter) for
TS-7250.
What are included in this option? A MAX197 or anythings else?
Can I get a pure TS-7250 board and plug a MAX197 with myself to
perform the A/D task?
Somebody told me that it can't, so I would like to verify it.
Thanks a lot!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Current measurement IC?, Philip Heron |
|---|---|
| Next by Date: | Re: [ts-7000] setting com1 baud rate, Daniel Smolik |
| Previous by Thread: | [ts-7000] TS-7250 flash foot-print?, Ronald Gomes |
| Next by Thread: | [ts-7000] Re: OP-ADC 12-bit 8ch A/C converter for TS-7250, Jesse Off |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU