Re: [ts-7000] eCos for the TS7250

To:
Subject:	Re: [ts-7000] eCos for the TS7250
From:	Curtis Monroe <>
Date:	Tue, 07 Jun 2005 16:53:22 -0400

I had the eCOS/RedBoot code for the ts-7200 but I don't know where the
code is for ts-7250.

-Curtis.


On Tue, 2005-06-07 at 09:12, sdwood68 wrote:
> Does a board support package exsist for eCos os the 7250? Or has any 
> one gotten it up and running?
> 
> Thanks!
> 
> Stuart
> 
> 
> 
> 
> 
> 
> ______________________________________________________________________
> Yahoo! Groups Links
>       * To visit your group on the web, go to:
>         http://groups.yahoo.com/group/ts-7000/
>           
>       * To unsubscribe from this group, send an email to:
>         
>           
>       * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>         Service.
> 



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] eCos for the TS7250, sdwood68 Re: [ts-7000] eCos for the TS7250, Curtis Monroe <=

Previous by Date:	[ts-7000] eCos for the TS7250, sdwood68
Next by Date:	[ts-7000] Re: ARM based PC, vocemanago
Previous by Thread:	[ts-7000] eCos for the TS7250, sdwood68
Next by Thread:	[ts-7000] Build New Kernel, jschick333
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU