[ts-7000] printascii on TS7200

To:
Subject:	[ts-7000] printascii on TS7200
From:	Adriano Winter Bess <>
Date:	Mon, 16 May 2005 22:28:57 -0300

Hi list,

I am currently working with a TS7200 board and I am modifying the
kernel sources which came with the board. I tried to enable
CONFIG_DEBUG_LL in the kernel config to be able to use printascii to
debug code prior to console_init(), but I got an error saying that the
architecture was not supported (a quick look into 'debug-armv.S' was
enough to clarify why). I would like to now if anyone has an
implementation for such function or maybe could give me some
guidelines on writing my own.

Best regards,
Adriano
-- 
Adriano Winter Bess
awbess <at> gmail <dot> com




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] printascii on TS7200, Adriano Winter Bess <=

Previous by Date:	Re: [ts-7000] Wireless using NetGear wg111, Jim Jackson
Next by Date:	[ts-7000] Re: Library problems going from CF to flash, vocemanago
Previous by Thread:	[ts-7000] Wireless using NetGear wg111, Omar Rihani
Next by Thread:	[ts-7000] TS-7250 Debian distribution on USB drive, sdwood68
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU