Re: [ts-7000] Onboard clock

ts-7000

Re: [ts-7000] Onboard clock

To:
Subject:	Re: [ts-7000] Onboard clock
From:	Andy Gryc <>
Date:	Thu, 05 May 2005 00:24:51 -0400

You'll want to get the newer kernel build ts8 from Technologic's site.  
This is a known problem in the earlier kernel.
--Andy Gryc

>My 7200's clock is drifting .... really bad, like 10 min/hr
>Is there anything I can do about it?
>
>Tks
>  
>



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Skeleton GPIO device driver, Dan Re: [ts-7000] Skeleton GPIO device driver, Andy Gryc [ts-7000] Notes for building kernel driver, Andy Gryc [ts-7000] Re: Notes for building kernel driver, vocemanago [ts-7000] Re: Notes for building kernel driver, vocemanago [ts-7000] Onboard clock, Chuck Re: [ts-7000] Onboard clock, Andy Gryc <= Re: [ts-7000] Onboard clock, Eddie Dawydiuk

Previous by Date:	[ts-7000] Onboard clock, Chuck
Next by Date:	Re: [ts-7000] Re: prism2 driver for usb, Todd Elliott
Previous by Thread:	[ts-7000] Onboard clock, Chuck
Next by Thread:	Re: [ts-7000] Onboard clock, Eddie Dawydiuk
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU