[ts-7000] [ts7250] USB Keyboard

To:
Subject:	[ts-7000] [ts7250] USB Keyboard
From:	"Chris" <>
Date:	Sat, 30 Apr 2005 21:51:32 -0000

Hello Again,
I am now trying to get a USB Keyboard working with the TS-7250. I 
have compiled the kernel with support for USB, HID, HIDInput, and 
Input Core built into the kernel. I have also selected USB in 
the "EP93xx Keyboard Support" option. When I plug in the keyboard, I 
get the following messages:

hub.c: new USB device not_pci-1, assigned address 3
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: new USB device not_pci-1.1, assigned address 4
usb_control/bulk_msg: timeout
input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb1:4.0
input: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb1:4.1

The serial console never displays anything when that keyboard is 
used. Do I have to make any particular character nodes to get USB 
keyboards to work or what could I be missing here?

Thanks,
Chris Luu






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] [ts7250] USB Keyboard, Chris <=

Next by Date:	[ts-7000] Skeleton GPIO device driver, Dan
Next by Thread:	[ts-7000] Skeleton GPIO device driver, Dan
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU