[ts-7000] Recompiling the kernel after modification a file

ts-7000

[ts-7000] Recompiling the kernel after modification a file

To:
Subject:	[ts-7000] Recompiling the kernel after modification a file
From:	"mxbahrami" <>
Date:	Wed, 06 Apr 2005 15:25:46 -0000


Hello
I have changed a file in source of kernel.
I am going to recompile the file and kernel.
For recompiling the file, I stuck !!! 
the path of header files are different in the xxx.c and source files. 
It seems impossible to change all of them in *.h files.
How can I do it? what is the practical solution?

appreciate your help in advance.

MB





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Recompiling the kernel after modification a file, mxbahrami <=

Previous by Date:	Re: [ts-7000] Hardening a TS-5700, Andy Warner
Next by Date:	[ts-7000] Re: Floating Point problems with supplied JFFS2 image, dawydiuk
Previous by Thread:	[ts-7000] Hardening a TS-5700, Jeff Bower
Next by Thread:	[ts-7000] Re: Floating Point problems with supplied JFFS2 image, dawydiuk
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU