People,
Sorry to bother you all but I cannot use a compact flash (256MB) with
my TS-7200 board. And I do not know I.
I ran all the commands that the TS-7200 ARM manual gives to us, like
cfdisk, mkfs.ext2, tar (...) debian256-10-28-2004.tar.bz2 and fsck on
my Fedora Core 3 machine.
What am I doing wrong? TS-7200 debian image continues to tell me that
I need to fsck the cf card. I even force the execution of fsck on my
fedora machine but nothing helped.
Someone can help me on this?
=========== Info on my machine ===========
Athlon XP 2600+
1GB RAM
40GB HD (ext3)
Fedora Core 3
=========== Info on my machine ===========
=========== Log from TS-7200 ===========
Using base address 0x00218000 and length 0x0015bI.Linux version
2.4.26-vrs1-cirrus-1-2-1-ts5
CPU: Arm920Tid(wb) revision 0
Machine: ep9301
On node 0 totalpages: 4096
zone(0): 6144 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 1 totalpages: 4096
zone(0): 6144 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyAM0,115200 root=/dev/hda1
Calibrating delay loop... 81.30 BogoMIPS
Memory: 8MB 8MB 8MB 8MB = 32MB total
Memory: 28652KB available (1229K code, 301K data, 60K init)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: Testing write buffer: pass
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA
ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA
ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ enabled
rtc: no TS-5620 RTC detected.
ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
about to do sbc_setinfo
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
Technologic Systems TS-7XXX IDE initialization - driver version 1.3,
6/21/04.
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
JP3 is set
CFI: Found no TS-7200 high flash device at location zero
Creating 3 MTD partitions on "TS-7200 flash":
0x00000000-0x00020000 : "TS-BOOTROM"
0x00020000-0x00620000 : "Linux"
0x00620000-0x00800000 : "RedBoot"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
Checking root file system...
fsck 1.27 (8-Mar-2002)
e2fsck 1.27 (8-Mar-2002)
fsck.ext2: Filesystem has unsupported feature(s) (/dev/hda1)
e2fsck: Get a newer version of e2fsck!
fsck failed. Please repair manually and reboot. Please note
that the root file system is currently mounted read-only. To
remount it read-write:
# mount -n -o remount,rw /
CONTROL-D will exit from this shell and REBOOT the system.
=========== Log from TS-7200 ===========
=========== Details from TS-7200 ===========
>> TS-BOOTROM, Rev 1.04 - built 16:21:52, Oct 20 2004
>> Copyright (C) 2004, Technologic Systems
>> TS-7200: Rev D1 CPU, Rev A PLD
+Ethernet eth0: MAC address 00:d0:69:40:00:cd
IP: 192.168.7.50/255.255.255.0, Gateway: 192.168.7.1
Default server: 192.168.7.1, DNS server IP: 192.168.7.1
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version v2_0-TS_4 - built 16:22:30, Oct 20 2004
Platform: TS-7200 Board (ARM920T) Rev A
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
Copyright (C) 2004, Technologic Systems
RAM: 0x00000000-0x02000000, 0x00053e90-0x01fdd000 available
FLASH: 0x60000000 - 0x60800000, 64 blocks of 0x00020000 bytes each.
== Executing boot script in 0.100 seconds - enter ^C to abort
RedBoot> fis load vmlinux
RedBoot> exec -c "console=ttyAM0,115200 root=/dev/mtdblock1"
Using base address 0x00218000 and length 0x0015bI..Linux version
2.4.26-vrs1-cirrus-1-2-1-ts5
CPU: Arm920Tid(wb) revision 0
Machine: ep9301
On node 0 totalpages: 4096
zone(0): 6144 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 1 totalpages: 4096
zone(0): 6144 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyAM0,115200 root=/dev/mtdblock1
Calibrating delay loop... 81.30 BogoMIPS
Memory: 8MB 8MB 8MB 8MB = 32MB total
Memory: 28652KB available (1229K code, 301K data, 60K init)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
CPU: Testing write buffer: pass
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA
ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA
ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ enabled
rtc: no TS-5620 RTC detected.
ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
about to do sbc_setinfo
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
Technologic Systems TS-7XXX IDE initialization - driver version 1.3,
6/21/04.
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
JP3 is set
CFI: Found no TS-7200 high flash device at location zero
Creating 3 MTD partitions on "TS-7200 flash":
0x00000000-0x00020000 : "TS-BOOTROM"
0x00020000-0x00620000 : "Linux"
0x00620000-0x00800000 : "RedBoot"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing init memory: 60K
INIT: version 2.85-ts1.00 booting
http://www.embeddedarm.com
email:
devfsd v1.3.25 started for /dev
now mounting /proc
mounting local filesystems (in fstab)
INIT: Entering runlevel: 3
Setting hostname....
Bringing up interface eth0..
enable_irq(39) unbalanced from c02c10b8
Bringing up interface eth0..
Bringing up interface lo..
setting kernel IP routing tables
route: SIOC[ADD|DEL]RT: Network is unreachable
Starting portmap...
Starting INETD...
Starting apache.../www/apache/bin/apachectl start: httpd started
Technologic Systems TS-LINUX/arm 5.0
ts7200 login:
=========== Details from TS-7200 ===========
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|