[ts-7000] another point on communication over COM1

ts-7000

[ts-7000] another point on communication over COM1

To:
Subject:	[ts-7000] another point on communication over COM1
From:	"mxbahrami" <>
Date:	Thu, 31 Mar 2005 16:59:25 -0000


FYI, I can communicate over this port with regular modem.
I did the test with and without CRTSCTS . no difference.
I am wondering raising which pin on serial port trigger 
serial_IO_handler?
Thanks
MB






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] another point on communication over COM1, mxbahrami <=

Previous by Date:	[ts-7000] Re: problem in communication over COM1, mxbahrami
Next by Date:	Re: [ts-7000] JTAG Debugging on TS-7200/7250, Wiwat Tara
Previous by Thread:	[ts-7000] Re: problem in communication over COM1, mxbahrami
Next by Thread:	Re: [ts-7000] JTAG Debugging on TS-7200/7250, Wiwat Tara
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU