In fact , only the setting of AGC is not preserved. By looking through
the source code , I found that AGC is set to auto mode inside the
pwc_video_open. Therefore , no matter what value you have picked
inside camstream, it will restore to auto mode automatically.
Becoz I need this feature for a demonstration urgently, I have fixed
it by myself. The patch is attached in my email.
(Based on the source code come with 2.6.20.6 kernel)
On Dec 14, 2007 11:29 AM, Ben Lau <> wrote:
> Hi all,
>
> I have a Philips SPC900NC. I would like to disable the auto AGC and
> shutter speed for another program that use GStreamer as input source.
> The camera's parameter is tuned inside Camstream, and then pressed the
> "Save user settings" button. However, the setting can not be preserved
> for another program and even for camstream itself. Open the camera
> again by camstream will restore to default setting unless the "Restore
> user setting" button was pressed.
>
> How can I preserve the user setting for another program?
>
> Thanks.
>
pwc-10.0.12-agc-fixed.patch
Description: Text Data
_______________________________________________
pwc mailing list
http://lists.saillard.org/mailman/listinfo/pwc
|