[pwc] panning problem/calibration

To:
Subject:	[pwc] panning problem/calibration
From:	Chris Bare <>
Date:	Sat, 3 Jun 2006 17:36:51 -0400 (EDT)

I'm using the pwc driver version 10.0.12-rc1 with OrbitView 1.0.1 at 320x240
30fps. It mostly works, but sometimes the panning stops working completely,
and other times, it seems to loose track of where the left and right stops
are. If I pan back and forth from end to end a couple of times, it will stop
going all the way to one end. I have to either unplug it or physically turn it
to reset it.
Does this sound like a hardware issue or a software issue?
It always seems to recover if I physically move it or unplug/replug it.

Is there a calibration utility floating around somewhere?
-- 
Chris Bare

_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

<Prev in Thread]	Current Thread	[Next in Thread>
[pwc] panning problem/calibration, Chris Bare <=

Previous by Date:	Re: [pwc] [PATCH] libpwc and type 675 webcam, Luc Saillard
Next by Date:	[pwc] Bare minimum example or simple library for PWC ??, vroemm
Previous by Thread:	Re: [pwc] [PATCH] libpwc and type 675 webcam, Luc Saillard
Next by Thread:	[pwc] Bare minimum example or simple library for PWC ??, vroemm
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU