| To: | Philips Webcam Linux Driver <> |
|---|---|
| Subject: | Re: [pwc] pwc900NC driver parameters |
| From: | Luc Saillard <> |
| Date: | Mon, 27 Mar 2006 15:40:12 +0200 |
On Sun, Mar 26, 2006 at 07:52:10AM +0200, Bernd wrote: > Hello, > I have a couple of issues using the module parameters for the pwc driver with > the PWC900NC. > > How can I use the pwc driver parameters to turn on / off the LED's? I tried > several combinations with modprobe, but never had success. Perhaps we need to send a new command to control the led, but i've never use this feature. Astromy guy's disable the light but open the webcam. > The same thing is the debug 'trace' option. How can I enable / disable it? using insmod pwc.ko trace=65535 [other options] or edit /etc/modprobe.conf /etc/modprobe.d/ ... like any others options for a module. Luc _______________________________________________ pwc mailing list http://lists.saillard.org/mailman/listinfo/pwc |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [pwc] pwc900NC driver parameters, Bernd |
|---|---|
| Next by Date: | [pwc] pwc900NC driver parameters, Bernd |
| Previous by Thread: | [pwc] pwc900NC driver parameters, Bernd |
| Next by Thread: | [pwc] pwc900NC driver parameters, Bernd |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU