pwc
[Top] [All Lists]

[pwc] Using Philips ToUCam PCVC740K on OpenSuSE 10.0

To:
Subject: [pwc] Using Philips ToUCam PCVC740K on OpenSuSE 10.0
From: Carlos Olle-Francisco <>
Date: Sun, 26 Feb 2006 03:59:29 +0100 (CET)
Hi,

I've trying to use my PCVC740K "ToUCam Pro" on linux
for a while without much success.

The kernel version is:

uname -a
Linux linux 2.6.13-15.8-smp #1 SMP Tue Feb 7 11:07:24
UTC 2006 i686 i686 i386 GNU/Linux

I downloaded the lastest version (10.0.11) of pwc
driver from www.saillard.org site and followed build
instructions from

http://www.novell.com/coolsolutions/feature/16340.html

The driver seems to load ok; After the execution of
"modprobe pwc" dmesg returns this:

pwc: Philips webcam module removed.
pwc: module not supported by Novell, setting U taint
flag.
pwc: Philips webcam module version 10.0.11-unofficial
loaded.
pwc: Supports Philips PCA645/646, PCVC675/680/690,
PCVC720[40]/730/740/750 & PCVC830/840.
pwc: Also supports the Askey VC010, various Logitech
Quickcams, Samsung MPC-C10 and MPC-C30,
pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye
and Visionite VCS-UC300 and VCS-UM100.
pwc: Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II)
USB webcam detected.
pwc: Registered as /dev/video0.
usbcore: registered new driver Philips webcam

running "setpwc -p" returns:

setpwc v1.1, (C) 2003-2005 by 
Current device: Philips 740 webcam
VIDIOCPWCPROBE returns: Philips 740 webcam - 740
Serial number:  RS100003E1D8001
Resolution (x, y): 176, 144
Offset: 0, 0
Framerate: 10
Brightness: 32256
Hue: 65535
Colour: 32768
Contrast: 32768
Whiteness: 43008
Palette: YUV 4:2:0 Planar
Compression preference: 1
Automatic gain control: -2093
Whitebalance mode: auto
Blinking of LED is not supported by the combination of
your webcam and the driver.
Sharpness: -1
Backlight compensation mode: off
Anti-flicker mode: off
Noise reduction mode: 1
Pan/tilt range is not supported by the combination of
your webcam and the driver.
Get pan/tilt position is not supported by the
combination of your webcam and the driver.

The problem is that xawtv, kopete, gnomemeeting and
other applications hung in trying to use the webcam.
The problem seems to appear only on resolutions higher
than 160x120. Running:

mplayer tv:// -tv
driver=v4l:device/dev/video0:width=160:height=120

the image appears clear and OK. Any other resolution
(320x240, 640x480) does not display any image. Same
behavior qastrocam program.

Any tip on how to proceed will be appreciated.

Thanks


                
______________________________________________
LLama Gratis a cualquier PC del Mundo.
Llamadas a fijos y móviles desde 1 céntimo por minuto.
http://es.voice.yahoo.com
_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

<Prev in Thread] Current Thread [Next in Thread>
  • [pwc] Using Philips ToUCam PCVC740K on OpenSuSE 10.0, Carlos Olle-Francisco <=
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU