Re: [pwc] Install problem

To:	Philips Webcam Linux Driver <>
Subject:	Re: [pwc] Install problem
From:	Luc Saillard <>
Date:	Mon, 20 Feb 2006 15:57:37 +0100

On Mon, Feb 20, 2006 at 01:22:43PM +0100, Lars Andre Sunde wrote:
> 
> Hi,
> 
> Having a problem getting pwc-10.0.11 installed on my linux box. Using vanilla 
> kernel 2.6.10 patched with RTAI 3.3 (realtime system patch).
> 
> Did the following:
> # downloaded the file
> # tar xvf pwc-10.0.11.tar....
> # cd pwc-10.0.11...
> # make
> 
The driver needs to have a configured kernel with header. If you have build
your kernel in a another directory that is not detected. you can try to
specify the kernel source directory with:

 make KSRC=/xxxx/linux

Luc
_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

<Prev in Thread]	Current Thread	[Next in Thread>
[pwc] Install problem, Lars Andre Sunde Re: [pwc] Install problem, Luc Saillard <= SV: [pwc] Install problem, Lars Andre Sunde Re: SV: [pwc] Install problem, Luc Saillard

Previous by Date:	Re: [pwc] pwc V4l2, Luc Saillard
Next by Date:	Re: [pwc] Philips SPC610NC, Luc Saillard
Previous by Thread:	[pwc] Install problem, Lars Andre Sunde
Next by Thread:	SV: [pwc] Install problem, Lars Andre Sunde
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU