| To: | |
|---|---|
| Subject: | [pwc] Cannot access Philips Webcam |
| From: | Michael Hierweck <> |
| Date: | Sat, 03 Dec 2005 01:12:09 +0100 |
Hello!
After some years of successfull usage of my Philips Webcam PCVC740K I
suddenly cannot access my Webcam via /dev/video0:
I get this messages:
Dec 3 00:56:20 server kernel: pwc type = 730
Dec 3 00:56:20 server kernel: pwc type = 730
Dec 3 00:56:20 server kernel: pwc set_video_mode(640x480 @ 5, palette 15).
Dec 3 00:56:20 server kernel: pwc decode_size = 5.
Dec 3 00:56:20 server kernel: pwc Using alternate setting 3.
Dec 3 00:56:20 server kernel: pwc isoc_init() submit_urb 0 failed with
error -38
Dec 3 00:56:20 server kernel: pwc isoc_init() submit_urb 1 failed with
error -38
Why type = 730? It should be 740.
v4l-info reports:
### video4linux device info [/dev/video0] ###
general info
VIDIOCGCAP
name : "Sotec Afina Eye"
type : 0x1 [CAPTURE]
channels : 1
audios : 1
maxwidth : 640
maxheight : 480
minwidth : 160
minheight : 120
channels
VIDIOCGCHAN(0)
channel : 0
name : "Webcam"
tuners : 0
flags : 0x0 []
type : CAMERA
norm : 0
tuner
ioctl VIDIOCGTUNER: Invalid argument
audio
VIDIOCGAUDIO
audio : -1
volume : 0
bass : 0
treble : 0
picture
VIDIOCGPICT
brightness : 0
hue : 65535
colour : 32768
contrast : 32768
whiteness : 0
depth : 24
palette : YUV420P
buffer
VIDIOCGFBUF
base : (nil)
height : 0
width : 0
depth : 0
bytesperline : 0
window
VIDIOCGWIN
x : 0
y : 0
width : 640
height : 480
chromakey : 0
flags : 327680
Why "Sotec Afina Eye"? Until some weeks ago wehen I used the webcam for
the last time, it was detected as philips webcam...
Can anyone explain this strange behaviour?
I'm still using kernel 2.6.10 an did not change anything.
Thanks,
Michael
_______________________________________________
pwc mailing list
http://lists.saillard.org/mailman/listinfo/pwc
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [pwc] Error message Failed to set LED on/off time, Dirk Vornheder |
|---|---|
| Next by Date: | Re: [pwc] Error message Failed to set LED on/off time, Luc Saillard |
| Previous by Thread: | [pwc] Error message Failed to set LED on/off time, Dirk Vornheder |
| Next by Thread: | Re: [pwc] Cannot access Philips Webcam, Luc Saillard |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU