[pwc] How to turn of LED at Startup

pwc

[pwc] How to turn of LED at Startup

To:	Philips Webcam Linux Driver <>
Subject:	[pwc] How to turn of LED at Startup
From:	Dominik Pusch <>
Date:	Thu, 28 Jul 2005 22:20:02 +0200

Hi,
after booting the kernel, the LED of my Philips PCVC740K is on. When I load 
the pwc-module 'modprobe pwc leds=0,0', it stays on. When I start a v4l 
Application like mplayer, it still stays on.
Firstly when I exit mplayer, the LED is turned off. When I start mplayer 
again, it stays off (fine! That's what I want).
But I like to have LED status off directly after booting my system. Is there a 
way to do this?

Thanks in advance and excuse my horrible english,
Dominik (from germany)
_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[pwc] How to turn of LED at Startup, Dominik Pusch <= Re: [pwc] How to turn of LED at Startup, Patrik Jakobsson Re: [pwc] How to turn of LED at Startup, Sandy McArthur

Previous by Date:	[pwc] RE: Can not compile pwc-10.0.7a with 2.6.12-rc3-mm1, Florian Engelhardt
Next by Date:	[pwc] Logitech Quikcam 4000 Pro zoom, JCA
Previous by Thread:	[pwc] RE: Can not compile pwc-10.0.7a with 2.6.12-rc3-mm1, Florian Engelhardt
Next by Thread:	Re: [pwc] How to turn of LED at Startup, Patrik Jakobsson
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU