[pwc] QuickCam Pro 4000

To:
Subject:	[pwc] QuickCam Pro 4000 - broken pipe
From:	Brandon Keepers <>
Date:	Wed, 29 Jun 2005 15:55:18 -0500

When trying to use a Logitech QuickCam Pro 4000 with pwc-10.0.7a I get
the following error:

Error while accessing device /dev/video0: Broken pipe

With the following output from dmesg:

pwc Failed to set LED on/off time.
pwc type = 740
pwc type = 740
pwc set_video_mode(176x144 @ 10, palette 15).
pwc decode_size = 1.
pwc Using alternate setting 1.
pwc Failed to set video mode  fps; return code = -32
pwc set_video_mode(160x120 @ 10, palette 15).
pwc decode_size = 1.
pwc Using alternate setting 1.
pwc Failed to set video mode  fps; return code = -32

Here is my setup:
- Fedora Core 4 (2.6.11-1.1369_FC4)
- pwc-10.0.7a
- Logitech QuickCam Pro 4000

Any help at figuring out why this is not working would be appreciated.

Thanks,
Brandon

signature.asc
Description: This is a digitally signed message part

_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

<Prev in Thread]	Current Thread	[Next in Thread>
[pwc] QuickCam Pro 4000 - broken pipe, Brandon Keepers <=

Previous by Date:	Re: [pwc] ARCOM's VIPER board EMBEDDED LINUX, Andrew Taylor
Next by Date:	[pwc] Using v4l2 gives grey images, Niclas Anderberg
Previous by Thread:	[pwc] ARCOM's VIPER board EMBEDDED LINUX, italyboi
Next by Thread:	[pwc] Using v4l2 gives grey images, Niclas Anderberg
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU

[pwc] QuickCam Pro 4000 - broken pipe