Thanks for all the advice. I contact AT and they still have the cables. In=
case anyone is looking here are the part numbers:
AT822 037003060 MIC CABLE ASSEMBLY $35.48
AT822 147400020 MINI MIC CABLE $=
Message: 10.
Subject: 74
The first cable is 5 pin XLR to dual 1/4=94 the second is the 5 pin XLR to =
Message: 3.
Subject: 5mm stereo.
You can order by sending money via Paypal t to <payp=
> and be sure to include both the part number/quantity and your =
full USA address in the comment section of the paypal transaction and $5.00=
for shipping.
As far as the windscreen goes I=92m going to try this one
WindTech MM-18 Mic-Muff
http://www.amazon.com/gp/product/B00ECOMLWU/ref=3Dox_sc_act_title_2?ie=3DUT=
F8&psc=3D1&smid=3DA17MC6HOH9AVE6 <http://www.amazon.com/gp/product/B00ECOML=
WU/ref=3Dox_sc_act_title_2?ie=3DUTF8&psc=3D1&smid=3DA17MC6HOH9AVE6>
Not a Rycote, but I=92m on a bit a budget=85 ;-)
Thanks again,
Jim
> On Aug 4, 2015, at 8:04 AM, [naturerecordists] <natur=
> wrote:
>
> > I recently acquired a AT822 at a great price but it does not come with =
a cable or windscreen. I would really appreciate any recommendations for a =
cable to interface it to my Olympus LS-10 and a decent windscreen for it as=
well.
>
> Jim,
>
> The cable you need is a 5 pin XLR to 3.5mm mini jack. You might find one=
> with an internet search, but if you have to make one or have one made, I=
> would start with a 3.5mm to 3.5mm screened stereo cable. It must be
> screened. One end is cut off and soldered to a 5 pin XLR. One side of eac=
h
> balanced output is grounded to make it unbalanced. If you buy a long 3.5m=
m
> lead you can make a spare cable.
>
> One side of each balanced mic output has to be grounded to make an
> unbalances line. The mic has to be powered from an internal battery.
>
> See:
> http://www.audio-technica.com/cms/resource_library/literature/2bb35b75eaa=
1f5 <http://www.audio-technica.com/cms/resource_library/literature/2bb35b75=
eaa1f5>
> 86/p52062_at8022_ss_en_lores.pdf
>
> David Brinicombe
>
>
>
|