| Subject: | Re: Cable help |
|---|---|
| From: | "Gregory O'Drobinak" gmo_dunes= |
2 Date: Sat Apr 27, 2013 8:08 am ((PDT)) Max: Here's a link to the data sheet: http://www.audio-technica.com/cms/resource_library/literature/2bb35b75eaa1f= 586/p52062_at8022_ss_en_lores.pdf The mic connector is a 5-pin XLRF. Pin 2 is the left channel output and pin 4 is the right channel output. Wir= e these to tip and ring of the 3.5 TRS plug, respectively Pins 1,3 and 5 should be connected to the shield of the 3.5 TRS plug. Good luck! Greg |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Cable help, Marc Myers |
|---|---|
| Next by Date: | [Nature Recordists] Cable help, Max |
| Previous by Thread: | Re: Cable help, Marc Myers |
| Next by Thread: | Re: Cable help, Max |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU