| Subject: | 8. Re: iRig pre |
|---|---|
| From: | "Raimund" animalsounds |
| Date: | Sat Jan 5, 2013 10:56 am ((PST)) |
> I own two AT3032, an Art Phantom II Pro and a Y cable XLR R+L to Jack 3,5= stereo, so I'm able to connect Two AT3032 to a Sony M10 (or Olympus LS5) v= ia ArtPhIIPro: can this be usefull to our test? Hi Marco, Yes, this Y cable can be used and I guess that you always used this cable f= or all your tests in conjunction with the ArtPhIIPro. It is just the common way for connecting a balanced microphone to an unbala= nced 3.5mm stereo microphone input. Most of these cables connect the second= (unused) output signal rail to ground (pin 1). I'm unfortunately not sure = what effect this excatly has on the AT3032. If you wanted to try the alternative connection scheme that I just describe= d, then you would need a different cable. Regards, Raimund |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | 7. Re: iRig pre, m.pesente@tiscali.it |
|---|---|
| Next by Date: | Azden FMX-42, Max |
| Previous by Thread: | 7. Re: iRig pre, m.pesente@tiscali.it |
| Next by Thread: | Azden FMX-42, Max |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU