thanks Grant, according to DPA the r-44 supplies more than enough power to=
handle even 4 of the DPA4060's connected & these issues appear even if jus=
t one is attached. The powering issue also wouldn't explain the pick up of =
the internal electronics of the recorder (regardless of mic position) & i'm=
more & more convinced that its some strange way the Roland recorders are b=
uilt that happens to come up with these issues when using this particular m=
ic. That said, one chap who also has the R-44 & the DPA4060's has mentioned=
that his work fine !
arghhhhhh !
--- In "Grant Finlay" <> wrote:
>
> It's called "motor boating"
> The non-techy explanation is that it can't supply enough power to the mic=
s, you need to roll off some of the bottom end to get around this.
> Or use an outboard PH48v supply.
> The SD302 has this issue too with various mics, sanken cs-1 etc..
>
> Regards,
> Grant.
> http://naturesounds.co.nz
>
|