| Subject: | 1. Re: Initial SASS test shows bands of harmonics |
|---|---|
| From: | "Raimund" animalsounds |
| Date: | Tue Mar 13, 2012 2:19 am ((PDT)) |
> I also measured the voltage across the capsules. With 2 capsules per chan= nel, it's just 0.54V. I then disconnected one one each side, and the remain= ing two had 1.32 across them. Still far short of the recommended 5V... Hi Peter, Note that the (internal) 5V can only be measured when no microphone is conn= ected to recorder. Due to to current that is drawn by the connected PIP-pow= ered mic, it just normal that the voltage accross the microphone connectors= drops. However, the voltage should not drop too much. I guess that the rem= aining voltage should be at last somewhere between 1.0 and 1.5 V or so, but= I have not much practical experience with such PIP mics... Regards, Raimund |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Battery Boxes, chrishails50 |
|---|---|
| Next by Date: | 2. Re: Initial SASS test shows bands of harmonics, Mike Rooke |
| Previous by Thread: | 1. Re: Initial SASS test shows bands of harmonics, Scott Fraser |
| Next by Thread: | 1. Re: Initial SASS test shows bands of harmonics, Ray Mansell |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU