Hi,
Im using the correct file - thats a good start :)
> It would be interesting Mike if you could try Spectral Layers again,
> bearing in mind that we would like to keep all the harmonics below 4
> kHz.
Check the previous post of mine with the bugswat.wav file.
http://tech.groups.yahoo.com/group/naturerecordists/message/46033
> I found I could remove the insect whine just below 4 kHz using a VERY
> narrow horizontal selection in RX, and Edit/ Silence selection. RX
> normal version works fine on my Mac OSX 10.4.
The process I used was similar. Using the frequency selector which can track
frequencies within a tolerance range for a given period of time, so you can
follow tones or insects in this case.
>
> What version of Spectral Layers are you using?
The pro version, although the trial should work with the same recording at 16Khz
and mono.
BR
Mike.
<snip>
"While a picture is worth a thousand words, a
sound is worth a thousand pictures." R. Murray Schafer via Bernie Krause.
------------------------------------------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/naturerecordists/
<*> Your email settings:
Digest Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/naturerecordists/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
------------------------------------------------------------------------
|