[Top] [All Lists]

Re: sound edit pops

Subject: Re: sound edit pops
From: "G" gwapuffin
Date: Sat Oct 1, 2011 11:04 am ((PDT))
I had a large 2 hour file of flight calls from migratory birds and I was in a 
hurry to cut the sections that didn't include calls.  Had I read the manual I 
would have found the option to move the selection to zero crossing. 

--- In  "NormanD" <> wrote:
> You need to autolocate before cutting the file. The pop is probably because 
> the signal is not at the same + or - voltage at the joint and that creats a 
> sudden click.
> The safest way to join is to cut both sections at the zero crossing point.
> norman.
> --- In  "G" <gwapuffin@> wrote:
> >
> > If I edit my sound file with a selection and cut I get a pop at the edit 
> > location, how can I reduce or eliminate this pop?  Click and Pop filter 
> > does not take it out after doing an auto locate with the filter.
> > 
> > Windows XP Pro / Audition 2 / Soundblaster X-Fi card
> > 
> > Gerald
> >

"While a picture is worth a thousand words, a 
sound is worth a thousand pictures." R. Murray Schafer via Bernie Krause.

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Digest Email  | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU