Re: Windscreen/Muff for AT4022

Subject:	Re: Windscreen/Muff for AT4022
From:	"ng2307" ng2307
Date:	Wed Aug 31, 2011 10:34 am ((PDT))

Hi

in a similar arrangement (AT 3032), I use Rode's dead rats. I bought them f=
or shotguns but they work well with the ATs because the mic size is the sam=
e.
Otherwise you can easily follow the DIY way, using faux fur. I built a coup=
le of dead rats and they work well, apparently with no effect on sound.

--- In  "mrmarcanderson" <> wrote:
>
> Hi,
>
> I'll be using 2 x AT4022's in a parallel boundary array - what are others=
 using for wind screens / shields and where is a good place to buy them?
>
> Are there any DYI options?!
>
> Thanks
>
> Marc
>

<Prev in Thread]	Current Thread	[Next in Thread>
Re: Windscreen/Muff for AT4022, ng2307 <=

Next by Date:	Has the nature recordists email digest format changed?, R. Scott Vance
Next by Thread:	Has the nature recordists email digest format changed?, R. Scott Vance
Indexes:	[Date] [Thread] [Top] [All Lists]

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU