naturerecordists
[Top] [All Lists]

Re: LS-10 Question

Subject: Re: LS-10 Question
From: "vickipowys" vpowys
Date: Sun Jun 5, 2011 3:22 pm ((PDT))
John,

Note there are two different sensitivity settings.  Try switching to
'high' if it is already on 'low', for more sensitivity.  Good results
can also be had using 'low' at maximum volume '10'.  What mics are
you using?

Vicki


On 06/06/2011, at 2:53 AM, John wrote:

> I have recently purchased an Olympus LS-10 recorder and am quite
> satisfied with the sound quality but I have a question.
>
> It seems that I must run the "record level" at maximum ( internal
> or external mic)to capture the  soundscapes and biological sounds
> that I am interested in.
>
> Is this normal for the LS-10?
>
> Thanks
> John- "Rusting Iron"
>
>
>
> ------------------------------------
>
> "While a picture is worth a thousand words, a
> sound is worth a thousand pictures." R. Murray Schafer via Bernie
> Krause.
>
> Yahoo! Groups Links
>
>
>







<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU