Re: Tribbles (was LS-10 Arrived Today)

Subject:	Re: Tribbles (was LS-10 Arrived Today)
From:	"James Shatto" wwwshadow7
Date:	Sat Oct 30, 2010 1:49 pm ((PDT))

http://home.earthlink.net/~shadow_7/tribble.gif

A picture of my tribble(s).=C2=A0 In reverse order since it was me taking i=
t apart, not putting it back together.=C2=A0 You don't quite need all the g=
unk I have on mine.=C2=A0 Mine is more or less to make OMNI mics a bit more=
 directional, and to block off all rear access to have an air chamber / are=
a of calm.=C2=A0 When I go zeppelin I'll probably go one layer on the mic a=
nd a pantyhose or something over the zeppelin to cut gusts of wind.

As you can see it's just a long strip of fake fur folded in half for the mo=
st part and stitched by hand down the seams.=C2=A0 Making a sock that is th=
en inverted and put over the mic with the seams going up and down.=C2=A0 Mo=
st of our sound scape comes on the horizontal plane anyway.=C2=A0 And if my=
 fake fur was longer / denser / softer, I'd probably only need 1x layer.

- James


--- On Sat, 10/30/10, Rick Munday <> wrote:

<Prev in Thread]	Current Thread	[Next in Thread>
Re: Tribbles (was LS-10 Arrived Today), James Shatto <=

Previous by Date:	Re: LS-10 Arrived Today, Rick Munday
Next by Date:	Re: [Nature Recordists] LS-10 Arrived Today, Rick Munday
Previous by Thread:	[Nature Recordists] Sennheiser ME67 handling noise, Stephen T
Next by Thread:	ME67 handling noise, more info required, Stephen T
Indexes:	[Date] [Thread] [Top] [All Lists]

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU