=C2=A0
Thanks all,
The L-4E5C looks better than MR202-AT. Mike thanks for the yahoo group
link, the diagrams are too small to make out though.
I came across this site, which allows one to custom pre-fab cable
orders. I might just have them make the cable, since all my electrical
equipment is currently in storage.
http://www.redco. com
-Charles
On 2/24/10 9:42 AM, walunit wrote:
>
>
>
> Pardon my jumping in a bit late. I've had great results with this
> setup:
> http://groups. yahoo.com/ group/naturereco rdists/photos/ album/178792253=
7 /pic/list
> <http://groups. yahoo.com/ group/naturereco rdists/photos/ album/17879225=
37 /pic/list>
> using Canare L-4E5C obtained from http://www.josephel ectronics. com/
> <http://www.josephel ectronics. com/>
> Regards,
> Mike
>
> --- In naturerecordists@ yahoogroups. com
> <naturerecor dists%40yahoogro ups.com>, Charles Veasey
> <charlesjveasey@ ...> wrote:
> >
> > Hello,
> >
> > Thanks for the follow-ups. Because the old post you mentioned, I am
> > considering making it myself using the Mogami 2930.
> >
> > I found a website that sells it in bulk:
> > http://www.studiowi ring.com/ mogami.html
> <http://www.studiowi ring.com/ mogami.html>
> >
> > Also considering for a cheaper price the Canare MR202-A*T.
> > *http://www.fullcomp ass.com/product/ 298483.html
> <http://www.fullcomp ass.com/product/ 298483.html>
> >
> > For the latter, you get more than three times the cable for the money.
> > The current stereo cable I use is the Canare MR202-AT, it was made by a
> > local music shop here in Albany, NY
> >
> > Anyone ever have failure with the Carare type?
> >
> > Thanks again,
> > Charles
> >
>
>
|