| Subject: | Re: NTG3 and high frequency sounds with FR2-LE |
|---|---|
| From: | "Grant Finlay" grantfinlay |
| Date: | Mon Dec 7, 2009 5:15 pm ((PST)) |
It could be "motor boating", basically it means that the mixer (or recorder in this case) is having trou= ble providing enough current for the mic. Several small mixers (ie: SD302) = have this problem with various microphones. You can use a separate ph48v po= wer supply for the mic to get around the issue, they have some here: http://www.trewaudio.com/consignment/microphone_acc/ Regards, Grant http://naturesounds.co.nz --- In "Mike Rooke" <> wrote: > > Hi, > First I suspect this mic is faulty, but would like to know if anyone = has experience low to high to low frequency sounds (repeating) with the Rod= e NTG3 and Fostex FR2-LE (on max gain) combination? An odd question since m= y other mics work fine yet this new one may have some serious issues. > > -Mike. > |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | NTG3 and high frequency sounds with FR2-LE, Mike Rooke |
|---|---|
| Next by Date: | Re: NTG3 and high frequency sounds with FR2-LE, Mike Rooke |
| Previous by Thread: | NTG3 and high frequency sounds with FR2-LE, Mike Rooke |
| Next by Thread: | Re: NTG3 and high frequency sounds with FR2-LE, Mike Rooke |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU