naturerecordists
[Top] [All Lists]

5. Re: DC power for SD 722

Subject: 5. Re: DC power for SD 722
From: "Dan Dugan" dandugan_1999
Date: Sat Nov 21, 2009 12:55 pm ((PST))
John Hartog, you wrote,

>> Wire it either:
>>
>> pin-1 to negative (-)
>> pin-4 to positive (+)
>>
>> OR
>>
>> pin-2 to negative (-)
>> pin-3 to positive (+)

Can you explain why not both pairs? My understanding was always 1 & 4 (to p=
ower) and optionally add 2 & 3 (to charge).

> Wired either way, my 702 fails the switch-over almost every time.

I assume you mean every time external battery is low? I've always had a goo=
d switch-over when I pull the plug, but not with low battery.

-Dan Dugan





<Prev in Thread] Current Thread [Next in Thread>
  • 5. Re: DC power for SD 722, Dan Dugan <=
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU