naturerecordists
[Top] [All Lists]

Re: Plug in power voltage?

Subject: Re: Plug in power voltage?
From: "Matt Blaze" matthew.blaze
Date: Fri Aug 21, 2009 8:59 am ((PDT))
On Aug 21, 2009, at 7:07, Klas Strandberg wrote:

> Hi folks!
>
> It would help me and users if I better knew about the plug in power
> voltage that different recorders provide.
>
> This is the test:
>
> 1/ Connect a potentiometer and a mA meter in series between input
> and ground.
> 2/ Set the potentiometer so that the mA meter shows 0,5 mA.
> 3/ Measure the voltage between input and ground.
>
> For the moment I am specially interested in the voltage that Sony
> PCM-D50 provides at a given current, like 0,5 mA.
>
> Klas.
>
>
>
Klas,

I also just now measured the zoom H4n,

On the H4n, open circuit PIP voltage is 2.84V

<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU