So do I normally, but SD themselves told me not to due to the nature of the=
ir output stage. I think 'older' versions of the MixPre you could.
But as SD said not too I bowed to there expertise.
Phil
On 1 Feb 2009, at 16:37, Lou Judson <> wrote:
I always tie pins 1 & 3 to ground, pin 2 hot.
<L>
Lou Judson =E2=80=A2 Intuitive Audio
415-883-2689
On Feb 1, 2009, at 8:16 AM, Philip Tyler wrote:
That should have been pin 2 hot!
Sorry brain not working.
Phil
On 1 Feb 2009, at 16:08, Philip Tyler <> wrote:
Hi
The MixPre has a 3.5mm tape output and a 3.5mm tape return. Plus
you can make up a 3.5mm to 2 x XLR's if you want. This gives you
the advantage of slightly higher gain, always useful when nature
recording. If you make your own XLR leads only wire pins 1 & 2 with
pin 1 being earth and pin 2 earth. It is to do with the
'electronic' balanced output.
Hope that helps.
Phil
------------------------------------
"While a picture is worth a thousand words, a
sound is worth a thousand pictures." R. Murray Schafer via Bernie Krause
Yahoo! Groups Links
|