| Subject: | 9. Re: Nady DMP-2 phantom mic preamp |
|---|---|
| From: | "Lou Judson" inaudio |
| Date: | Sun Feb 1, 2009 8:37 am ((PST)) |
I always tie pins 1 & 3 to ground, pin 2 hot. <L> Lou Judson =95 Intuitive Audio 415-883-2689 On Feb 1, 2009, at 8:16 AM, Philip Tyler wrote: > That should have been pin 2 hot! > > Sorry brain not working. > > Phil > > On 1 Feb 2009, at 16:08, Philip Tyler <> wrote: > > Hi > > The MixPre has a 3.5mm tape output and a 3.5mm tape return. Plus > you can make up a 3.5mm to 2 x XLR's if you want. This gives you > the advantage of slightly higher gain, always useful when nature > recording. If you make your own XLR leads only wire pins 1 & 2 with > pin 1 being earth and pin 2 earth. It is to do with the > 'electronic' balanced output. > > Hope that helps. > > Phil |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | 8. Re: Nady DMP-2 phantom mic preamp, Philip Tyler |
|---|---|
| Next by Date: | 10. Re: Nady DMP-2 phantom mic preamp, Rob Danielson |
| Previous by Thread: | 8. Re: Nady DMP-2 phantom mic preamp, Philip Tyler |
| Next by Thread: | 10. Re: Nady DMP-2 phantom mic preamp, Rob Danielson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU