naturerecordists
[Top] [All Lists]

Re: Pressure waves in recordings

Subject: Re: Pressure waves in recordings
From: "Tim Nielsen" supernielsen
Date: Sat Mar 22, 2008 9:15 am ((PDT))
I wonder if what you're hearing as pressure waves, is what we'd call  
'mic bumps', some mechanical vibration transfered to the mic through  
the equipment you're using to hand-hold. Often they appear as low  
frequency 'thumps', which I suppose could be confused for wind  
overloading a mic, although that is usually much stronger and noticable.

If you have the ability in the computer, try rolling off the low end  
frequencies below about 100Hz and see if that eliminates the sound. If  
so, then what you're hearing is probably mechanical vibrations that  
the mics are picking up.

Tim

On Mar 22, 2008, at 6:27 AM, Jatinder Singh wrote:

> Hello All,
> I am new to recording nature/ bird sounds.
> I was recording birds at the edge of a large lake, and upon review  
> of the recording I notice "pressure waves" in the recording. It was  
> not windy during the recording. I am using ME66 microphone equipped  
> with a sponge windscreen in association with a MZRH1 recorder, the  
> whole contraption is hand held.
> Could anyone please educate me on these "pressure waves" and help me  
> eliminate them in future.
> Thank you
> Jatinder
>
> ---------------------------------
> Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  
> Try it now.
>
>
>
> 







<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU