Re: Was I changing the subject?

Subject:	Re: Was I changing the subject?
From:	"Phil Tyler" macmang4125
Date:	Sun Feb 17, 2008 11:28 am ((PST))

I did not think I was changing the subject, Paul was talking about the noise he 
encountered while using this pre-amp with particular microphones all I was 
doing was 
elaborating on the noise figures of the mic's he was using and that he should 
use a load 
resistor. Yes there was other information there but it was all part of Paul's 
enquiry as to 
the noise he was experiencing with this particular amplifier.

Phil

--- In  Lou Judson <> wrote:
>
> Could you change the sunject when you change the, um subject?
> 
> Thanks
> On Feb 16, 2008, at 3:21 PM, Philip Tyler wrote:
> 
> Hi Paul
> 
> The spec for the MXL V63M is a self noise of 20dB,
> while that of the K6/ME66,
>

<Prev in Thread]	Current Thread	[Next in Thread>
Re: Was I changing the subject?, Phil Tyler <=

Previous by Date:	MXL V63M, was Re: Nady DMP-2 phantom mic preamp, Lou Judson
Next by Date:	Re: Parabolic Reflector plus Head Spaced Parallel Boundary (, Dan Dugan
Previous by Thread:	MXL V63M, was Re: Nady DMP-2 phantom mic preamp, Lou Judson
Next by Thread:	Preamp : need advice, jmcharcot
Indexes:	[Date] [Thread] [Top] [All Lists]

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU