[Top] [All Lists]

Re: Canare L-4E5C

Subject: Re: Canare L-4E5C
From: "Walter Knapp" waltknapp
Date: Fri Sep 21, 2007 10:28 am ((PDT))
Posted by: "artsonics"

> I mentioned the wrong cable earlier....I Know some were using the
> L-4E6S  however I was wanting to use the narrow guage cable that
> Walter Knapp   had mention using but the actual model cable was not
> mentioned and I was wanting to know if it was known as L-4E5C? this is
> also wanted for stereo use....hopefully this is fine.

Yep, that's the right code for the smaller diameter version. Look here:

I use both versions. My longer cables are L-4E5C, shorter ones generally
L-4E6S. Partially that's a result of the evolution of my system as the
longer cables are the newest.

My Y breakouts are made from the inner conductors of the L-4E3-2P two
channel snake. Two of those conductors covered with the fabric tube
braid I use will just fit into the boot of the Neutric XLR.


"While a picture is worth a thousand words, a
sound is worth a thousand pictures." R. Murray Schafer via Bernie Krause

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Digest Email  | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:


<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU