naturerecordists
[Top] [All Lists]

Re: Experiences with Windpac Fabric...?

Subject: Re: Experiences with Windpac Fabric...?
From: "Martyn Stewart" mijdog2000
Date: Mon Feb 5, 2007 2:51 pm ((PST))
I have two of them Danny and I've never had any trouble with the fabric,
then again I'm careful with my stuff. How someone can puncture holes in it
is beyond me..

I do believe that Winpac will replace the fabric for the cost of shipping
though so give them a try..



Martyn

****************************************

Martyn Stewart

Bird and Animal Sounds Digitally Recorded at:

http://www.naturesound.org

Redmond. Washington. USA

N47.65543 W121.98428

e-mail: 

Tel: 425-898-0462

Make every Garden a wildlife Habitat!

*****************************************

  _____

From: 
 On Behalf Of Danny Meltzer
Sent: Monday, February 05, 2007 12:36 PM
To: 
Subject: [Nature Recordists] Experiences with Windpac Fabric...?



Hi all,

I just got a used Windpac. It's in great shape, almost new....but
almost. I do see some very slight wear on the fabric at the joints
and what appears to be a tiny abrasion bordering on a hole. Martyn
and anyone else who uses this...what have been your experiences with
the fabric? Do you have any tips or care reccomendations for it?
What I've read is that it looks somewhat delicate, it is meant to be
very tough and I will proceed as if that is the case.

Danny










<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU