Re: Tascam HD-P2 gain (was My MZ-RH1 mic in: -122.8 dBu nois

Subject:	Re: Tascam HD-P2 gain (was My MZ-RH1 mic in: -122.8 dBu nois
From:	"Raimund Specht" animalsounds
Date:	Thu Jan 4, 2007 8:17 am ((PST))

I will be able to carry out a direct max gain (and noise floor)
comparison between a TASCAM HD-P2 and a SD 722 in about three weeks.

Regards,
Raiumund

--- In  Rob Danielson <> wrote:
>
> Thanks. I remove the specificity until we can run
> tests-- maybe in the $1000 contest. My most
> stable/reliable reference is use the 722's gain
> and then what I must do to match
> listening/playback volume with the other recorder
> at full gain. Sometimes the numbers do match what
> I get listening (like with the MT's published
> specs) and other times not. I should look in the
> archive, did you come-up with a direct, sound
> file dB comparison at max gain between your HD-2
> and another known recorder?  The Marantz
> numbers/situation are not clear to me either. Rob
> D.

<Prev in Thread]	Current Thread	[Next in Thread>
Re: Tascam HD-P2 gain (was My MZ-RH1 mic in: -122.8 dBu nois, Raimund Specht <=

Previous by Date:	Tascam HD-P2 gain (was My MZ-RH1 mic in: -122.8 dBu noise floor, Rob Danielson
Next by Date:	Clock test between HD-P2, 671 and SD722, Raimund Specht
Previous by Thread:	Tascam HD-P2 gain (was My MZ-RH1 mic in: -122.8 dBu noise floor, Rob Danielson
Next by Thread:	Clock test between HD-P2, 671 and SD722, Raimund Specht
Indexes:	[Date] [Thread] [Top] [All Lists]

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU