| Subject: | Determine the maximum input before the mic amp distorts (with no pad). |
|---|
Not so important for nature recording, but useful if you consider a very sensitive mic and want to calculate the SPL that will clip your recording, or in finding the dynamic range. This test needs audio measuring equipment to do it right, or a VOM and audio generator otherwise. Few specs mention it. |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Record the noise of a 150 ohm resistor at maximum gain. You need the, Unknown |
|---|---|
| Next by Date: | Total preamp gain, for comparison between recorders. Note that most, Unknown |
| Previous by Thread: | Record the noise of a 150 ohm resistor at maximum gain. You need the, Unknown |
| Next by Thread: | Total preamp gain, for comparison between recorders. Note that most, Unknown |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU