naturerecordists
[Top] [All Lists]

Re: Post recording setup advice

Subject: Re: Post recording setup advice
From: "Dale Hoffman" dale40203
Date: Wed Oct 18, 2006 3:03 pm (PDT)
>Dale Hoffman wrote:
>
>>I've been feeding my recorder signal through an old stereo receiver
>>and from there to an M-Audio FireWire Audiophile digitizer by way of
>>the receivers phone jack.
>>
>>My receiver's controls are accessed through a remote which is clumsy.
>>I'm getting tired of this setup and wonder if I need something like a
>>preamplifier? The catalogs show mixers and workstations, and have me
>>confused not to mention concerned about cost.
>>What do I look for?
>>
>>I'd like to side step the Receiver amp completely except for playback
>>through the attached speakers.

Dan Dugan responded:

>Sure. Just feed your recorder's output directly into the RCA Line
>Inputs on the back of your M-Audio Audiophile interface.

Dale  Hoffman answers:

I'd like to be able to change volume, tone, balance settings.

Dale




<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU