| Subject: | If you set the recording gain below 8 you are attenuating the |
|---|
signal, all the way down to 0 which is 100% attenuated, no sound. Any setting above 8 is adding gain. A setting above 25 adds a lot of noise. |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Plug-in power is supposed to be 3.3v, but one owner measured only, Unknown |
|---|---|
| Next by Date: | Low Gain Mic-In and Line-In are almost the same noise and gain, the, Unknown |
| Previous by Thread: | Plug-in power is supposed to be 3.3v, but one owner measured only, Unknown |
| Next by Thread: | Low Gain Mic-In and Line-In are almost the same noise and gain, the, Unknown |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU