Next I played the result back on the speaker trying to acheive a

naturerecordists

Next I played the result back on the speaker trying to acheive a

Subject:	Next I played the result back on the speaker trying to acheive a

roughly "human" level of amplification.  I did this by using the same
mic distance as for the control recording, "Low-Sens" on the HiMD and a
manual mic-recording level of 15 once again.  I then adjusted the volume
on the speakers to produce roughly the same levels on the meters as for
the first recording.  Notice a slight speaker rattle from my cheap
speakers on one of the syllables.  You may also hear my computer fan in
the background too.  tr2.wav

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Next I played the result back on the speaker trying to acheive a, Unknown <=

Previous by Date:	First I created the base recording on the HiMD in by singing into, Unknown
Next by Date:	Leaving the speaker volumes as set I then switched the recording, Unknown
Previous by Thread:	First I created the base recording on the HiMD in by singing into, Unknown
Next by Thread:	Leaving the speaker volumes as set I then switched the recording, Unknown
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU